For these models, you must use the FOSCAM app, available on the Play Store (Android) and App Store (iOS)

Once you've installed the app, follow the steps below:

1) Press the RESET button on the camera and hold it down for 5 seconds;
2) Your smartphone must be connected to the 2.4 GHz Wi-Fi network of your home or desired location when configuring the camera - These cameras will not work with 5GHz networks.
3) Make sure the GPS function is active on your smartphone, otherwise the app will not work properly;
4) Open the FOSCAM application and scan your camera's QR code;
5) The name of the Wi-Fi network will appear and you will have to enter your network password;
6)  When prompted, insert the following details: username: admin / password: 1234 (you can find them underneath your camera);
7) Wait until configuration has completed;

If you can monitor your camera after this procedure, then the setup was successful.