How to use a SIM card with your Chacon 4G
Use this guide if your camera does not connect (the LED should have a slow blue blink) when you insert a SIM card, even though the SIM has an active data plan. The camera has to be configured manually with your operator's APN settings. This is done by updating the camera's configuration from a micro SD card.
Before you start
- Make sure the SIM card has an active data plan. A voice-only or SMS-only SIM will not work.
- Make sure the SIM card's PIN code is disabled. You can do this by inserting the SIM in a phone and removing the PIN in the security settings.
- Prepare a micro SD card formatted in FAT32.
- Find your operator's APN settings. You can usually find them online with a search like "[your operator] APN internet configuration". For the most common French operators, see the list at the bottom of this page. Note that the APN is case-sensitive: type it exactly as given by your operator.
Step 1: Create the configuration file
Create a new text file named sdcfg.ini (all lowercase). Paste the following content and replace CHANGETHIS with your operator's APN:
[sdcfg]
updateapn=1
customapn=CHANGETHIS
customuser=
custompwd=
customauth=0
Most operators require no user name or password, so leave those fields empty.
Windows tip: make sure the file is not saved as
sdcfg.ini.txt. Enable "File name extensions" in File Explorer's View menu to check.
Step 2: Update the camera configuration
- Copy
sdcfg.inito the root folder of the micro SD card (not inside a subfolder). - With the camera powered off, insert the micro SD card and power the camera on.
- Wait a few minutes while the update runs. Do not power off the camera or remove the card during this time.
- Once the update is complete, power off the camera and remove the micro SD card.
Step 3: Insert your SIM card
Insert your operator's SIM card (PIN code disabled) into the camera's SIM slot and power the camera back on.
Step 4: Clean up
Delete sdcfg.ini from the micro SD card. Otherwise the camera will apply it again at every restart.
Settings for common operators (France)
Orange
[sdcfg]
updateapn=1
customapn=orange
customuser=
custompwd=
customauth=0
SFR
[sdcfg]
updateapn=1
customapn=sl2sfr
customuser=
custompwd=
customauth=0
Free Mobile
[sdcfg]
updateapn=1
customapn=free
customuser=
custompwd=
customauth=0
Bouygues Telecom
[sdcfg]
updateapn=1
customapn=mmsbouygtel.com
customuser=
custompwd=
customauth=0